Cascaded Video Optical Converter

HiOSO Technology Co.,Ltd is one of the leading cascaded video optical converter manufacturers, equipped with productive factory, welcome to buy and wholesale 16-node cascaded video optical converter products from us.

Overview

HiOSO FOWAY8000N series cascaded (16-node) digital video optical transceiver adopts uncompressed digital video transmission, which combine TDM (Time Division Multiplexing) technique and ADM (Add/Drop Multiplexer) technique. 16-node cascaded optical transceiver adopts 2.5G optical transmission platforms, simultaneously transmitting 16 channels video signal in one fiber. It supports at least 16 nodes and 1～4 channels video. Local equipment can transmit 16 channels video in real time.

Cascaded optical transceiver adopts modularization design; and supports function extending. The remote transceiver can supply 2 channels RS-485/422 shared data and 2 channels independent channel point-to-point data/audio signal. Each remote transceiver or local transceiver can transmit multi-channel audio, data and contact closure signal through adding audio/data extending board.

Cascaded optical transceiver supports optical chain protection (optional), which can automatically isolate fault node, ensuring other node transceivers work normally. It can also be configured with network management plug, to implement network management function of remote and local transceivers.

It is now widely used in security monitoring and control system, highway, ITS and so on.

Character：

Industrial-level design with SMT techniques

Full digital transmission in fiber, multi-service flexible configuration on the same platform

Supply desktop and integrated card type

Based on large scale integrated circuit

Transmission in single-fiber, dual-fiber is optional

Fully compatible with PAL/NTSC/SECAM

Support asynchronous data (positive/reverse), transmission rate is up to 115.200Kbps

Support RS232, RS422, RS485 or Manchester code

Support SNMP

Carrier class centralized network management

Industrial-level design with SMT techniques

Full digital transmission in fiber, multi-service flexible configuration on the same platform

Supply desktop and integrated card type

Based on large scale integrated circuit

Transmission in single-fiber, dual-fiber is optional

Fully compatible with PAL/NTSC/SECAM

Support asynchronous data (positive/reverse), transmission rate is up to 115.200Kbps

Support RS232, RS422, RS485 or Manchester code

Support SNMP

Carrier class centralized network management

Technical specification

Fiber port                                                                     Port ： FC/SC/ST optional

Wavelength ：Single-mode1310nm/1550nm

Multi-mode 850nm/1310nm

Transmission power ： -8∽-4dBm

Receiving sensitivity ：<-23dBm(bit error rate<10-11)

Transmission distance ：Single-mode 20/40/60/80/100Km

Multi-mode 220m/550m

Video 

Signal type ： PAL/NTSC/SECAM

Nominal input/output level ： 1Vp-p

Nominal input/output impedance ：75Ω

Bandwidth per channel ： 6.5 MHz

Sample frequency： 13.5MHz

Quantization ： 8bit

Connector：BNC interface

Audio 

Bandwidth per channel ： 20Hz~20K Hz

Sample frequency ： 48K Hz

Quantization ：24bit

THD (Total Harmonic Distortion) ： 0.1% (typical value)

Audio connector ：RJ45 interface/ phoenix

Asynchronous data

Connector ：RS232/RS485/RS422/ Manchester code

Working mode ：Full/Half Duplex

Data rate ： 115.200Kbps

Bit error rate ：<1×10-9

Data connector ：RJ45 interface/ phoenix

Ethernet

Standard ：IEEE802.3, IEEE802.3u

Working mode ：10/100M adaptable, Full/Half Duplex

Connector ：RJ45 interface/ phoenix

Contact closure

Number of channels：1 channel

Working mode：set open/shorted circuit alarm

Connector ：RJ45 interface/ phoenix

Operating environment

Power supply ：input AC220V/DC-48V; output DC5V

Power consumption：10W

Operating temperature ：-40℃-75℃

Storage temperature ：-40℃-+85℃

Relative humidity ：95%

Dimension

199mm(L)×159mm(W)×44mm(H)

440mm(L)×226mm(W)×176mm(H)

Order information

Type	Node/ Central	Function	Specification
FOWAY8016NR-A1RD1- S20F	Central	16V↓＋1A↑+1D↓	16-channel reverse video + 1-channel audio+1-channel reverse data 20 kilometers FC
FOWAY8001NT-A1RD1- S20F	Node	1V↑＋1A↑+1D↓	channel video+1-channel audio+1-channel reverse data 20 kilometers FC
FOWAY8002NT-A1RD1- S20F	Node	2V↑＋1A↑+1D↓	2-channel video+1-channel audio+1-channel reverse data   20 kilometers FC
FOWAY8004NT-A1RD1- S20F	Node	4V↑＋1A↑+1D↓	4-channel video+1-channel audio+1-channel reverse data   20 kilometers FC